Expert Answers about Chevrolet Wheel Covers Hubcaps
- Do You Offer a Moon Hubcap For Dexstar Vintage Steel Wheel # AM20395?
- Currently we do not offer a baby moon style hubcap which fits the Dexstar Vintage Steel Wheel # AM20395 you found. Typically a Baby Moon Hubcap # PX1307SS requires a Conventional wheel like the Wheel # AM20514 which has a raised section for the hubcap to press onto. This Hubcap # PX1307SS has a 10-1/2" outer diameter so you may be able to create mounting tabs which you can add to the mounting studs to hold it in place, if you are unable to find another hubcap for this wheel elsewhere.
view full answer... - Baby Moon Hub Caps for 1958 Chevy Apache Pickup with 17.5" Wheels
- I did some looking around and it looks like we only have baby moon hubcaps that would work on as large as 16" diameter wheels, like the Phoenix USA Baby Moon Hub Cover 12" Diameter # PX1309SS. I've linked our entire selection of baby moon style hub caps for you to look at and see if there are any that you might be able to make work on your 1958 Chevy Apache in the event that you need smaller than 12" diameter baby moons.
view full answer... - 15 Inch Wheel Compatible With Baby Moon Hubcaps
- The wheel used on the # AM32395 Karrier 205/75-15 wheel doesn't have the retention clips or nubs stamped into it that would hold a hubcap in place (see photo).
I have some options for you though. A conventional steel wheel like what's provided with # AM32352 does have the nubs or clips that would allow you to install a baby moon hubcap like # AM90086. This wheel features the same tire used on the # AM32395 that you'd asked about.
If you wanted to stick with a wheel like what's provided...
view full answer... - Which Baby Moon Hubcaps Fit the Dexstar 13 Inch Conventional Steel Wheel 20214
- I have a solution for you, but the Phoenix # PXQ1400 are not compatible with the Dexstar Conventional Steel Wheel with Offset - 13" x 4-1/2" Rim - 5 on 4-1/2 - Black # AM20214. The only compatible baby moon style hubcaps we have that are compatible with those wheels are the Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1 # AM90086, which are a chrome plated cap that is 9-5/8" diameter.
These would be the only available match we have available.
view full answer... - Available Hubcaps and Center Caps for Trailer Wheels
- We do offer trailer Baby Moon hubcaps # AM90086 and # AM981306 which fit different sizes of conventional steel trailer wheels like # AM20504. We also have wheel center caps like # 319EZ that fit specific styles and sizes of aftermarket wheels. All of these can be seen on the linked page.
view full answer... - Availability of Baby Moon Hubcap Compatible w/ Dexstar # AM20214 Conventional 13x4-1/2 Steel Wheel
- We do indeed offer a baby moon hubcap compatible with the # AM20214 wheels. The part number is # AM90086
view full answer... - Availability of Dexter Conventional Steel Wheel - 15 x 6 Rim - 6 on 5-1/2 With Tire Mounted?
- The Karrier ST225/75R15 Radial Trailer Tire with 15" Black Steel Wheel # AM32575 is currently the only wheel and tire combo we have with the Dexstar Conventional Steel Wheel # AM20514. This will accept the Phoenix USA Baby Moon Hubcap # PX1307SS. This hubcap is stainless steel rather than chrome plated so you will not have to worry about the finish chipping off over time.
view full answer... - Replacement Wheels for 1966 Chevy C/K Series Pickup That Accept 10-1/8 Inch Hub Caps
- I may be able to provide a solution for you here, but we do not have any wheels that are 15" diameter and 5" wide; additionally since the wheels we carry are designed for use on trailers, almost all of them will not have an offset, so you will need to take that into consideration when choosing one for your truck. With that said, we do have wheels that are 15x6 in a 6 on 5.5" bolt pattern, which would require the use of a tire that is 205, 215 or 225 wide like the # AM10303 -but you will...
view full answer... - Is There a Pointed Baby Moon Wheel Center Cap For 15" Diameter Wheels with 5 Lugs?
- For your 15", 5 lug conventional wheels we only have the Baby Moon Trailer Wheel Center Cap # AM90086. We do not have a version of the Pointed Wheel Center Cap # AM981306 that fits on 6 lug, 15" wheels
view full answer... - Hub Cap or Center Cap for Dexstar Trailer Rims Item # AM20232
- For the Dexstar Trailer Wheel part # AM20232 that you referenced the only type of cap we offer that will fit this wheel is a center cap like the # 319EZ which fits through the pilot (center) hole of the wheel. The baby moon caps only fit the conventional style of wheels like part # AM20212. The correct baby moon for this wheel would then be the part # AM90086.
view full answer... - Baby Moon Hubcap for 15 Inch 5 Lug Conventional Steel Wheel
- The # AM981306 wouldn't be a fit for a 15 inch 5 lug wheel, and unfortunately it's the only pointed top baby moon hub cap we offer. The inside diameter of the hub cap would be too large to fit. If you could perhaps live with a standard baby moon hub cap, you could use part # AM90086.
view full answer... - Baby Moon Hub Caps for 13-Inch Trailer Wheels with 5-Lug Pattern
- We offer two versions of a baby moon trailer hub cap.
Part # AM90086 fits 13-, 14- and 15-inch 5-lug conventional steel trailer wheels like yours.
Part # AM981306 has a pointed center and fits only 15-inch 6-lug wheels.
view full answer... - Availability Of Hubs That Will Work With An OEM Ford Bronco Wheel
- It may be possible to use a Timbren Axle-Less setup like the # ASR3500S05 along with a hub 6 on 5-1/2" hub # AKIHUB-655-35-EZ-K. The bronco wheels should use the same standard 6 on 5-1/2" bolt pattern. However, in order to use the hubs, the wheel will need to have a center hole larger than 3" in diameter. All of the hubs we carry will have a portion that protrudes thru the center hole, so generally only trailer wheels will be compatible with trailer hubs.
view full answer... - Are Replacement Wheel Nut Covers For The Namsco Wheel Cover Available Individually
- We do offer them in a set of four, Lug Nut Covers for Wheel Masters and Namsco Wheel Covers - Chromed ABS Plastic - Snap In - Qty 4, part # WM9003-4, to replace your them on your Replacement Namsco Wheel Cover - 19-1/2", 8-Lug Wheels - 10 HH - Front - Qty 1, part # NA719581. Unfortunately, we do not offer them individually.
I have included a product description link below.
view full answer... - Recommended Wheel Covers For 16" Wheels On A 1991 Jamboree Rallye
- Yes, you're looking for the Replacement Namsco Wheel Cover # NA7160B1, which can also be purchased in a set of 4 with part # NA7160B0.
view full answer... - Do The Adco Tyre Gard RV Wheel Covers # 290-3967 Come In Quantities Of Two
- The Adco Tyre Gard RV Wheel Covers - Designer Series - 40" to 42" - Tan - Qty 4 # 290-3967 only come in sets of 4. We do carry the following colors in sets of 2:
Adco Tyre Gard RV Wheel Covers - Single Axle - 40" to 42" - Thermoplastic - Camo - Qty 2 # 290-3649.
Adco Ultra Tyre Gard RV Wheel Covers - Single Axle - 40" to 42" - Vinyl - Black - Qty 2 # 290-3977.
Adco Ultra Tyre Gard RV Wheel Covers - Single Axle - 40" to 42" - Vinyl - White - Qty 2 # 290-3949.
Adco Tyre Gard RV Wheel...
view full answer... - Are the Adco Tyre Gard RV Wheel Covers #290-3966 Sold in Pairs for Additional Wheels?
- The Adco Tyre Gard RV Wheel Covers - Designer Series - Single Axle - 43" to 45" - Tan - Qty 4 # 290-3966 you mentioned only come in quantities of 4. So if that is your desired cover and you want all matching covers you would need 2 sets and you'd of course have 2 spare covers.
If you just want the 6 wheel covers, then we have the similar Adco Ultra Tyre Gard RV Wheel Covers - Single Axle - 43" to 45" - Vinyl - White - Qty 2 # 290-3956, black # 290-3976, or diamond plate # 290-3756 sold...
view full answer... - Recommended RV Wheel Covers For 275/80R22.5 Wheels
- 275/80R22.5 Wheels come out to a diameter of 39.82" so we have three options for you:
Black - Camco Vinyl Wheel and Tire Protectors - 40" to 42" Item # CAM45251.
White - Adco Ultra Tyre Gard RV Wheel Covers - 40" to 42" Item # 290-3949.
Camo - Adco Tyre Gard RV Wheel Covers - 40" to 42" Item # 290-3649.
Each of these covers are designed for single axle wheels and simply slip right over your tires.
view full answer... - Availability of Cover for 5th Wheel Hitch
- The best cover for you will really depend on the size of the footprint your hitch takes up.
We offer two fifth wheel hitch covers that could work for you. The Reese # RP30055 you referred to fits hitches with a footprint up to 18 x 28 inches. The Classic Accessories 5th wheel hitch cover, part # CA80116 covers hitches up to 18 inches tall and a footprint up to 24 x 24 inches.
view full answer... - Can You Get A Single 30-32 Cover That Matches the Adco Tyre Gard Item # 290-3962
- The Adco Tyre Gard RV Wheel Covers Item # 290-3962 only come in a set of 4. You can purchase a single wheel cover however; it will not be a matching cover. I recommend Item # RA773215 for your fifth cover. It is a black cover so it will essentially go with any color combination you select.
view full answer...
Go To Results